Error code on KTM Duke 200 / low voltage problem "stator coil" check engine sign.

Malfunction blink codes on KTM Duke & RC, through check engine sign;

1. (2) short blinks = Crank position angle sensor malfunction

2. (6) short blinks = Throttle plate / position angle sensor malfunction
3. (9) short blinks = Manifold absolute pressure sensor malfunction

4. (11) blinks = 1 long + 1 short = Idle Air control sensor malfunction

5. (12) blinks = 1 long + 2 short = Coolant sensor malfunction

6. (13) blinks = 1 long + 3 short = Air intake sensor malfunction

7. (14) blinks = 1 long + 4 short = Fuel tank sensor malfunction

8. (15) blinks = 1 long + 5 short = Rollover sensor - circuit fault

9. (16) blinks = 1 long + 6 short = Radiator fan motor malfunction

10. (17) blinks = 1 long + 7 short = Lamda/ o2 sensor malfunction

11. (18) blinks = 1 long + 8 short = Engine diagnosis warning lamp malfunction

12. (19) blinks = 1 long + 9 short = Fuel level warning lamp

13. (21) blinks = 2 long + 1 short = Engine control relay malfunction

14. (22) blinks = 2 long + 2 short = Engine speed signal malfunction

15. (23) blinks = 2 long + 3 short = Travel speed sensor malfunction

16. (24) blinks = 2 long + 4 short = System voltage Low/High

17. (25) blinks = 2 long + 5 short = Side stand switch Malfunction

18. (33) blinks = 3 long + 3 short = Fuel injector failure

19. (41) blinks = 4 long + 1 short = Fuel pump relay failure

20. (45) blinks = 4 long + 5 short = Lamda/o2 sensor Heater failure

21. (49) blinks = 4 long + 9 short = Idle control malfunction