PETamentor 2 SS Spooler - Gearbox Upgrade - Assembly
Автор: Matthieu SAMSON
Загружено: 2023-06-01
Просмотров: 46793
Here's the latest upgrade to our PETamentor 2 SS.
I've integrated a geared spooler, and its design has been thought to stand up to all tests.
It's part of the latest batch of improvements to the PETamentor 2. The bearing cutter is also to be updated.
Everything you need, available now on our website :
https://petamentor2.com/
Join us on our Facebook group !
/ 594548605536945
Parts list and assembly instructions, in chronological order :
01 - Your Board
02 - Frame_Rear.stl
03 - 608zz Bearing (x2)
04 - M3 nut (x4)
05 - Countersunk wood screw Ø4x16 (x3)
You absolutely must attach it to the board at this point.
06 - Frame_Front.stl
07 - 608zz Bearing (x2)
08 - M8x100 countersunk screw (x1)
09 - M8x60 countersunk screw (x1)
10 - Spacers_for_B&C.stl
11 - M3x10 screw (x4)
12 - Countersunk wood screw Ø4x16 (x4)
13 - The 7RPM DC Motor
14 - M3x6 screw (x2)
6mm To avoid touching the motor's internal gears
--- (Edit : I'm going to remove these 2 holes to avoid any breakage)
15 - M3x8 screw (x4)
16 - Gear_A.stl
17 - M3 nuts (x4)
18 - The 6mm Flange coupling
19 - M3x16 screw (x4)
20 - M3x3 needle screw (x1)
21 - Remove M8x100 screw
22 - M8 Washer (x1)
23 - Gear_B.STL
24 - Replace the M8x100 screw
25 - M8 Washer (x1)
26 - M8 nut (x1)
27 - Remove M8x60 screw
28 - M8 Washer (x1)
29 - Gear_C.STL
30 - Replace the M8x60 screw
31 - M8 Washer (x1)
32 - M8 nut (x1)
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
