GoStream Deck&Duet Firmware Update v2.1.4 | OSEE

GoStream Deck&Duet Firmware Update v2.1.4
#osee #mhikstv #switcherstudio #switcher

GoStream Deck&Duet Firmware V2.1.4 Release Note:
1. Added ‘good’ recording quality (recording bitrate between Medium and High).
2. Tweaked type of measurements of some video layouts (made it coordinates instead of percentage).
3. Reduced opacity of labels in Multiview, they are partially transparent now.
4. Changed names of some parameters in the Menu.
5. Optimized streaming setting operations.

1. Prepare a SD Card formatted as FAT32, and download the newest file. Unzip the download file and then copy both .bin and .md5 files in the root directory of the SD card; Insert the SD Card into the GoStream Deck.
2. Turn on the GoStream Deck, and the device will start upgrading.
3. Then you will see buttons in the PGM&PVW BUS turn on the red light.
4. Wait a few minutes until all the lights turn green. Once the lights are green, the device will reboot, indicating that your device has been successfully upgraded.
5. To verify whether the firmware update was successfully completed, navigate to the main menu and check the version information.
6. If the monitor does not display the HDMI output signal after updating, please perform a hardware reset. The reset operation is to press and hold the volume adjustment button for 5 seconds.

Purchased Link:
https://osee-tech.com/?ref=ktvxnidz
https://osee-tech.com/products/gostre...
https://osee-tech.com/products/ndi-li...
https://osee-tech.com/products/new-in...
https://osee-tech.com/products/g7-b-s...
https://osee-tech.com/products/m2?ref...