Wilwood Master Cylinder installed and making custom brake lines.

Making new hard lines from the Wilwood prop valve to the factory hard lines on the frame.


Watch me put electric brakes on MiniSSkirt using the Bosch iBooster vacuum-independent electromechanical brake booster. With the help of Retrofitinnovations

https://www.retrofitinnovations.com/c...

HOW MUCH DOES IT COST TO LS SWAP YOUR VEHICLE?
   • 86 MONTE CARLOS SS: How much does it cost ...  
''
KORE 3 BIG BRAKE UPGRADE!!!!! (LS SWAPPED GBODY)
   • KORE 3 BIG BRAKE UPGRADE!!!!! (LS SWAPPED ...  

GM S10 BLAZER, 1998-2005, Ø325mm C5/C6
http://www.kore3.com/proddetail.php?p...

Year One Cast Aluminum N90 Wheel Kit (4) 17" x 8" with 4-1/4" Backspacing
https://www.jegs.com/i/Year-One/219/S...

Belltech 2" Drop Spindles 1998-2003 S-10 Chevy Blazer/GMC Jimmy
https://www.jegs.com/i/Belltech/146/2...

QA1Rear Coilovers
   • HOW TO INSTALL QA1 REAR COILOVERS: 86 Mont...  

Dakota Digital RTX Direct-Fit Gauge Kits RTX-86C-MC-X
https://www.summitracing.com/parts/da...


Dakota Digital OBD-II/CAN Interfaces BIM-01-2
https://www.summitracing.com/parts/da...

LS Swapped 1986 Monte Carlo SS-Gbody
@PENNYLS1



Parts list: 1998-2005 Chevy S10 Blazer 2WD
1. Rear calipers w/abutment brackets (used from salvage yard)
2. Rear parking brake assy (used from salvage yard)
3. Rotors and Pads (New)
4. Rear coilover relocation bracket (only needed if running coilovers in the rear)
5. Longer wheel studs. (my car is 12mmx1.5 studs, I used ARP part 100-7708)
6. Custom rear brake lines. ( you will have to adapt the rear hard line to a pair of rear soft brake lines running to the calipers. PENDING, I HAVEN'T DONE THIS YET
7. Adapter the G-Body Parking cable to work with the Blazer parking lever. (I purchased new Blazer rear parking cables, Haven't installed yet. I will make a video when I get them to work)

BMR Suspension COIL OVER CONV WITHOUT CA
Part Number: 142-CCK461H
https://www.jegs.com/i/BMR-Suspension...

ARP .509" Knurl Wheel Studs Most late GM (F-body, Vette)
Part Number: 070-100-7708
https://www.jegs.com/i/ARP/070/100-77...

Dynamic Friction Drilled/Slotted Brake Rotor [Silver], 1998-2005 GM
Part Number: 328-631-48035R
https://www.jegs.com/i/Dynamic-Fricti...

Dynamic Friction Drilled/Slotted Brake Rotor [Silver], 1998-2005 GM
Part Number: 328-631-48035L
https://www.jegs.com/i/Dynamic-Fricti...

R1 Concepts Optimum OE Brake Pads, 1997-2005 GM, Position: Rear
Part Number: 820-2551-0729-00
https://www.jegs.com/i/R1-Concepts/82...

Irish Marcelle Productions
Equipment used for production
NIkon Z30 w/16-50mm kit lens
DJI Mic 2 wireless mic
Rode Video micro 2 (shotgun mic)
iPad Pro 11inch
Lumafusion
Beats by: Crank Lucas