How to Replace Rear Upper Outer Control Arm Bushing 01-05 BMW 325Xi

Buy Now!
New Control Arm Bushing Set from 1AAuto.com https://1aau.to/ia-1ASFK01274

In the video, 1A Auto shows how to remove and replace a worn, or deteriorating rear upper outer control arm bushing. The video is applicable to the 01, 02, 03, 04, 05 BMW 325Xi and similar 3 series vehicles.

This repair was done on a 2001 BMW 325xi Base 2.5L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2001 BMW 325xi
2002 BMW 325xi
2003 BMW 325xi
2004 BMW 325xi
2005 BMW 325xi
2006 BMW 325xi

🔧 List of tools used:
• Pry Bar https://1aau.to/opd-1AXAA00020
• 17mm Wrench
• 18mm Wrench
• 13mm Socket
• 17mm Socket
• 18mm Socket
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench https://1aau.to/oEH-1AXAA00044
• 15/16 Inch Wrench
• Copper Anti-Seize
• Pick https://1aau.to/omv-1AXAA00037

Subscribe:    / @1aauto  

Check out our playlist:
BMW 325Xi 1997-2006 4th Gen:    • BMW 325Xi 1997-2006 4th Gen  

For More Info visit us at https://1aau.to/h-bNq

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.