HOW TO Change the oil on your 2013-2016 TOYOTA COROLLA for only $26!

Items needed:
1. Oil filter socket - https://a.co/d/5tGdiOs
2. 14mm Socket - https://a.co/d/9GQkCWf
3. 3/8 Ratchet - https://a.co/d/cSx1ykn
4. Oil Pan - https://a.co/d/9y5BYo0
5. Funnel - https://a.co/d/09eXVD4
6. Rags or old towels - https://a.co/d/09r5FVj
7. 0w-20 Synthetic Oil - https://www.walmart.com/ip/254038905?...
8. Oil Filter - https://www.walmart.com/ip/16879100?s...

Steps:
1. Apply rear parking brakes
2. Apply rear wheel chocks
3. Jack up passenger side of vehicle
4. Apply jack stand and lower jack, lowering car on to jack stand.
5. Open oil cap on valve cover to allow air flow.
6. Open 14mm drain plug bolt on oil pan under car with 3/8 racthet and 14mm socket, and drain oil into oil pan. Once oil drains out completely to a drip, reinstall oil drain plug and tighten back up to approx. 27ft/lbs
7. Use the oil filter socket and 3/8 ratchet to remove the oil filter housing, keep oil drain pan underneath to catch excess oil.
8. Apply a little oil to the new rubber o seal and replace the seal on the housing.
9. Replace oil filter with new one into housing.
10. Install new oil filter and housing.
11. Fill oil up with approx. 4.4 qt at the valve cover inlet. Check oil level.
12. Check for any drips underneath.
13. Check other fluid levels while under hood.
14. Start car and reset trip meters.
15. Check for any leaks again.
16. Enjoy uou fresh oil change and better performing car.



#howto #automaintenance #toyota #corolla #toyotacorolla #oilchange #oilchangediy #mechanic #autorepair #automotive #autoservice #diyer #diyprojects