Full Installation Oxford Heated Grips on Aprilia Tuareg 660

Complete installation of Oxford Premium Adventure Heaterz grips directly to the OEM wiring of my 2022 Aprilia Tuareg 660. This allows to use the OEM controls with the TFT display. I base my install on the manual created by    / @motorcycleblog   so thanks to you for making the guide.

Here's a link to the Facebook post with the PDF of the manual:
  / 1322540459091035  

Use these chapters to skip to sections you want
0:00 - Intro
0:36 - Motorcycle Blog manual
0:53 - Tools used - see full list below
1:08 - Step 1 Seat and Battery
1:19 - Step 2 Remove Windscreen
1:59 - Step 3 Remove TFT Display
2:19 - Step 4 Move TFT towards tank
2:51 - Step 5 Cut OEM connectors
3:07 - Step 6-7-8 Wiring
4:35 - Option remove navigation bar
5:02 - Step 9 Test before gluing
5:52 - Step 10 Add electrical tape
7:13 - Option re-route wiring
8:01 - Step 11 Remove hand guard
8:14 - Step 12 Remove OEM grip
8:39 - Step 13 Remove threaded insert
8:59 - Step 14 Test grip position
9:34 - Step 15 Cut excess rubber
10:13 - Step 16 Glue and install Left Oxford grip
10:49 - Step 17 Remove Right OEM grip
11:06 - Step 18 Sand plastic of throttle side handle
11:40 - Step 19 Install right Oxford grip
12:07 - Step 20 Drill holes in dash
13:35 - Step 21 Connect wires
13:46 - Step 22 Re-attach TFT display
13:57 - Step 23 Tie-wrap cables
14:08 - How to cover holes in dash
15:08 - Conclusion

Here are the tools I used
Wire stripper
Allen keys
T25 torx bit
Scissors
Safety knife
Phillips screwdriver
Electrical tape
crimp connectors
Heat shrink tubing
Heat gun
21/32" drill bit
Adjustable wrench
60 grit sand paper
Gorilla glue