Transit Custom how to replace front brake discs and pads replacement due to brake judder 2012 on
Автор: Marty's workshop
Загружено: 2019-09-25
Просмотров: 45331
Thank you for watching my how to replace front pads and disks on a transit custom video, tools and tightening torques are listed below.
Parts used in video
Mintex Front Pads https://ebay.us/s1j7fP
Brembo Front disks https://ebay.us/XVOJWT
Tools used
Spanners 15mm and 21mm
Pliers set
Screwdrivers
1/2 inch breaker bar
1/2 inch deep sockets 13mm and 21mm
3/8 flex ratchet
3/8 inch deep sockets 13mm and 17mm
Soft dead blow hammer
3/4 inch 36mm socket
Long torx t50 socket
3/8 torque wrench
Wire brush
Scraper
M10 x 1.5 bolt 100mm long at least
Tightening torques
Wheel bearing housing to hub/ strut bolts 53Nm
Break disk to wheel bearing hub 30Nm + 90 Degree Angle
Driveshaft nut 250Nm then rotate 5 times then 500Nm
Brake carrier to hub 270Nm
Calliper to carrier 60Nm
Road Wheels 200Nm
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting this channel
Thank you for watching please like my video if it helps and subscribe for more videos, also please follow me on Instagram to keep up to date with what's going on on my channel @ Martys_workshop
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
