Foredom Portable Rotary Micromotor - changing accessories
Автор: Metal Clay Ltd
Загружено: 2019-04-30
Просмотров: 1828
Changing accessories on the Foredom Portable Rotary Micro Motor.
To change an accessory or bur, first open the collet.
To open the collet, turn off the unit by holding down the on/off button for at least 2 seconds until the indicator light is off.
The collet will snap open when the knurled locking ring on the handpiece is turned toward the R (=Remove or Release). Twist it to the left if the nose is pointing away from your body. You can now remove the accessory and insert another. Insert the new accessory shank fully into the collet for maximum support. Do not use accessories with shanks less than 1″ (25mm) long.
To secure the accessory, twist the knurled locking ring toward the S (=Secure). Twist to the right if the nose is pointing away from your body, until it stops which locks the collet closed.
Never turn the power on to the handpiece when the collet is open or in the R (Release) position. If the power is on when the collet is open, it will damage the motor because the spindle is locked and it will not turn.
Always keep a bur in the collet when it is not in use.
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
