Upgrade your ender3 to direct drive with only one printed part
Автор: dela R
Загружено: 2022-04-11
Просмотров: 6595
This is the simplest design, only one component can be used to convert the ender 3 into a direct drive 3D printer.
STL(free): https://cults3d.com/en/3d-model/vario...
No complicated installation steps are required, and the upgrade can be completed smoothly by following the video prompts.
***Bill of Materials：
Note: Considering that some people don't have the Insert Nut Tool, this version has two, one of which only requires a normal nut to assemble.
Version A (M3 Knurled Brass Nut):
1 1 prints(Ender3 with Orbiter-M3 Knurled Brass Nut.STL)；
2 M3 X 30 Socket Head Cap（1）；
3 M3 Knurled Brass Nut（M3X4X4.5mm）（2）;
4 The Orbiter V1.5 Extruder;
5 Teflon tube（70mm）；
Version B (M3 Square Thin Nut):
1 1 2 prints(Ender3 with Orbiter-M3 Square Thin Nut.STL)；
2 M3 X 30 Socket Head Cap（1）；
3 M3 Square Thin Nut: 5.4mm X 5.4mm X 1.8mm（2）；
4 The Orbiter V1.5 Extruder;
5 Teflon tube（70mm）；
Timestamps & Production steps：
0:03 Step 1: Print the Part
0:08 Step 2: Insert the Knurled Nut
0:24 Step 3: Insert a Cable Tie
0:42 Step 4: Replacing the Teflon Tube
1:33 Step 5: Install the Base and the Orbiter
2:39 Step 6: Turn the holder 180 Degrees
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
