Wings folded backwards! NEW 1/5 Scale RC Aircraft DH-80 Puss Moth Review, 翌烁模型新品舟蛾像真航模测评

This 1/5 scale Moth model from Yishuo Models is a bare-bones product, available in four versions: the trial version (full skin, landing gear and struts without realistic shapes), the advanced version (full skin, with realistic landing gear and struts), and the semi-skin-covered and fully skin-covered versions. For a better price-performance ratio and the glossy finish of the skin, I chose the advanced version.
Its factory finish is very high; all hinges are already glued and reinforced with screws; the struts and landing gear are already assembled; the entire assembly requires no glue. However, as a large-scale realistic model, the assembly time is still considerable, approximately 5-6 hours.
The most distinctive feature of this Moth model aircraft is its structural simulation. It uses the same folding mechanism as the real aircraft, folding first at the wing root and then the wing itself. The wing rotates around the struts and trailing edge screws. Once the wing is open, only two hand-tightened screws are needed. Positive and negative overloads are entirely borne by the struts. Its landing gear has a long shock-absorbing travel and large wheels, making it well-suited for grass runways. It features a magnetic side-opening canopy for quick battery changes and engine adjustments, and its all-fiberglass paint finish is exquisite.
In terms of flight performance, this aircraft is well-suited for recreational, realistic flying, boasting extremely graceful flight attitudes. Its low-altitude, high-speed flybys and continuous takeoffs and landings are among its most captivating maneuvers. Of course, its structural strength and power also support large-angle maneuvers; stall turns, barrel rolls, and loops are all possible, making it a true flying work of art.
Brand: Yishuo Model
Model: DH-80 Puss Moth
Scale: 1/5
Wingspan: 2260mm
Takeoff Weight: 5000g
Equipment Used by Haozi: 5060 KV400 motors, 13*7 propellers, PTK9840 servos, PTK9497 servos, Gens 6S 5100mAh 75C lipo, frsky X20RS remote controller

这架翌烁模型的1/5比例舟蛾是一款空机的产品，有四个版本可选，分别是体验版（全机蒙皮、起落架和斜撑无像真形状）、晋级版（全机蒙皮，带有像真起落架和斜撑）、以及半蒙绢版和全蒙绢版，为了一定的性价比和蒙皮的亮光效果，我选择了晋级版。
它的出厂完成度很高，所有的铰链已经粘贴，并且装好了加固螺丝；斜撑和起落架已经组装完毕；整个装机无需任何胶水，不过作为大尺寸像真机，需要的装机工时任然不低，大约需要5-6小时。
这架舟蛾航模最具特点的就是结构仿真，和真机使用了一样的折叠机构，先折叠翼根、再折叠机翼，机翼绕斜撑和后缘螺丝转动，打开机翼后仅需2颗手拧螺丝即可，正负过载完全由斜撑承载。它的起落架避震行程很长，轮子很大，很适合草地跑道的飞行。配有磁吸侧开门的头罩，方便快速更换电池和调整发动机，全玻璃钢喷漆材质，非常精美。
飞行性能上，这架飞机很适合休闲像真飞行，有着极为优美的飞行姿态，低空中速通场，起落连续都是它最为吸引我的飞行动作。当然它的结构强度和动力也支持进行大角度机动动作，失速倒转、桶滚、筋斗也可以完成，是一架不折不扣的飞行工艺品。
品牌：翌烁模型
机型：DH-80舟蛾
比例：1/5
翼展：2260mm
起飞重量：5000g
昊子使用的设备：
双天5060 KV400电机、13*7螺旋桨、PTK9840舵机、PTK9497舵机、格氏6S 5100mAh 75C锂电池、睿思凯X20RS遥控器