Simple DIY Boat Trailer Build part 2 of 3
Автор: Hartshut
Загружено: 2021-11-08
Просмотров: 5855
This is how I built an inexpensive boat trailer. I used 30 feet of "C" channel and 10 feet of square tubing. All of it was 1/8 inch thick walls. So not too heavy but more than adequate for a small aluminum boat. I used about 4 feet of 2 1/2" angle iron, about 18 inches of 3" flat bar, and 2 feet of 1 inch flat bar. I reused an axel and fender from a junky old trailer I've had for years. I bought new tires and rims and painted everything to match with paint from Tractor Supply. I made bunks out of 2X6 Douglas Fir and covered them with cheap carpet from Home Depot using contact cement and staples. I bought the rollers and bow support rubbers on Amazon. This is part two of three parts.
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
