How to discharge multiple LiPo batteries automatically (ft. AOK 150W discharger) - QUICK GUIDE

Returning back home with fully charged battery packs is like losing a battle. A battle against time, the weather, life obligations or an unlucky crash (or two).

Whichever the reason of your "defeat", it is advised to discharge your LiPo batteries back to storage voltage, if you are not planning on flying in the next few days. It is safer and good for the longevity of your batteries.

There are various ways of discharging LiPo batteries. You can use your charger, which usually can draw just a "weak" discharge current - this will take a lot of time, especially if you have many batteries to discharge. You can even hover indoors, since your motors can draw a substantial amount of current - but this is noisy, requires your full attention on the sticks and is also time consuming.

Instead, you can use the AOK 150W balancer/discharger, combined with a parallel board. This unit can also be used as a balancer and as a cell voltage monitor for your batteries (although there are many better and smaller options for this task). The kit comes with the discharge module and 3x 50W lamps, for a total of 150W max discharge.

Setting up and discharging are very easy and the overall size of the hardware is small enough to carry on trips as well, in case you need to discharge your LiPo batteries before a flight or long distance travel.

This is QUICK GUIDE: How to discharge multiple LiPo batteries quickly, automatically and "safely" (feat. AOKoda 150W discharger) - Let's go!

____________________
*If you like my content and want to support the channel, you can use the affiliate links below. I get a small kickback from the store if you decide to buy something and it costs nothing extra to you.
Thank you in advance!


AOK 150W discharger (balancer/discharger complete with controller, lamp sockets and lamps):
https://goo.gl/MsJtpb
or https://goo.gl/3gu9AK

Parallel board with fuses (I use the XT60 version):
https://goo.gl/KzTZmP
or https://goo.gl/jMe7th

Note: The last parallel board I ordered came with an XT60 main connector, so an adapter may be needed, to connect directly to the T-style connector of the discharge module:
https://goo.gl/iCxUPV
or https://goo.gl/b96iuc

XT60 to JST adapters:
https://goo.gl/yc4MLE
or https://goo.gl/9GVkG2

XT60 to XT30 adapters:
https://goo.gl/2okhvQ
or https://goo.gl/USfi3J

Celllog 8S: https://goo.gl/1HGH26
Celllog 8M (cheaper alternative): https://goo.gl/Fc9EFf


When it comes to LiPo batteries, it is better to play it safe. You should not leave your batteries unattended when charging / discharging.

Extra caution should be taken concerning the lamps of this discharger: make sure they are securely and safely fixed in a well ventilated or completely open fixture and that there are no flammable objects close to the lamps.

👍 PLEASE SUPPORT the MuteFPV channel:
-------
👍 Join my PATREON: http://mutefpv.com/patreon
👍 Tip my 'piggy bank' via PAYPAL: http://mutefpv.com/paypal

👍 Save and use these BOOKMARKS before purchasing new goodies (please bookmark the SHORTLINKS in your browser):
BANGGOOD: http://mutefpv.com/banggood
AMAZON (paid link): http://mutefpv.com/amazon
GETFPV: http://mutefpv.com/getfpv
EBAY: http://mutefpv.com/ebay
ALIEXPRESS: http://mutefpv.com/aliexpress
REELSTEADY: http://mutefpv.com/reelsteady

👍 THANK YOU in advance for your support!

(As an Amazon Associate I earn from qualifying purchases.)

-------------------------------
This video features the song "Jazzaddict's Intro" by Cosimo Fogg (201), available under a Creative Commons License
Song link:    • Видео  
Artist link:   / cosimo-fogg  
CC-by license: https://creativecommons.org/licenses/...
-------------------------------



#BestForLess
#muteFPV