Siemens NX tutorial | Swept, how to select, orientate and scale section curves

FF-1 | Siemens NX Tutorial Freeform | The course begins with the Swept command, which starts where the Extrude command ends with its options. This command can be used to guide, scale and orient section curves along curves or rules. It is used to design turbine blades, screw conveyors and complex flow channels. It is perfect for technical free forms.

▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
We look forward to your comments on YouTube. (and about your subscription ;-)
   / @learnnx  

▬about our learning platform▬▬
😃 All tutorials, clearly arranged, can be found here: https://learnnx.com
Learning videos with a short description, together with the exercise materials as download.
You can also search 🔎 for commands or topics.
And all according to the motto: step by step / for free / for all 🎈

▬Links▬▬▬▬▬▬▬▬▬▬▬▬▬
Sketch on path:
https://learnnx.com/course-modeling/b...

▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Introduction
00:00:57 Working with guide curves
00:03:46 Tolerances
00:05:15 Preserve Shape
00:05:42 Volumes and surfaces
00:06:13 Multiple cross sections
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

► visit us on https://learnnx.com

#learnNX #freeform #swept