Master Replicas Anakin AOTC SNV4 Pro Pixel Conversion

Master Replicas Anakin AOTC 2002 neopixel conversion

I'll do a proper build thread on this soon. Need to try get everything in order.

Some build notes are:
Started with master replicas anakin aotc 2002 lightsaber. Most of it didn't work except the light but it used an electro luminescent film so it was pretty dull.
It uses a snv4 pro core and pixel blade, I got them off Ali express for £50. It doesnt have to be this core but you must make sure the core uses a led momentary switch and not a microswitch.
Mace windu MR conversion kit, this needed a hole drilled for the switch and filing. Also some holes drilled and tapped to hold it all together. M3 for the silver thumb screw and m4 for the allen on the back. Think it was between £20 and £30
8mm led momentary switch. It just fits and no more. These are like £2 each on Ali express. (Get a few because I cooked 4 soldering them)
Wired the original switch as a kill switch.
Oilite brass bearing bushes to centre the core. This is the most important bit. Drilled and tapped, screw goes through the bubble box, hilt, brass, then a hole in the back of the core. I got 2 but you could get away with one. I put the other near the end screwed through the belt clip to balance the weight.

This is not plug and play by any means, but if you have the tools and can do some basic soldering it's a pretty cheap way to update an old saber. I had to desolder the original switch and put the new one on wires and the same for the neopixel end thing(I forgot the word).