How to Clean Lube Rewire Reconnect Old Kenmore Dryer Motor to a new one 279827 with harness - Part 1

The content of this video is put forth as INFORMATION and ENTERTAINMENT purpose only. Any action you take upon the information on this website is strictly at your own risk.
My mom Kenmore Dryer (110.77886100) sometime has a hum noise when starts and it sometime work and sometime don't; however, if we opened the dryers' door and turned counter clockwise to spin 1/4 on the drum, it will work again.
I have checked the switch, replaced the belt, wheels and pulley. It still happened and I believed it must be the motor not enough power to start after working hard for 40 years.
I opened it up and it is a old motor (at least 35-40 years old) without harness. I inspected it, cleaned it up (need to clean up lint to avoid fire). and lube the shaft with 3-in-1 Dry lube. I will order the 278927 motor but all the new one comes with a harness, I need to rewire/reconnect the old wires to the new one. I need to cross reference on what color wire on old wires need to go to the new "number" on the harness. I did not like to cut wires but in this case, I have to because my mom dryer is not plug an play. (the old one does not have a harness but all new one has a harness).
I need to cut and match what Color wires on the old one goes to what Number in the new motor.
Please watch the video at the end and it shows how to connect the old one with color coded wires to the new number on the harness based on instruction. If my lube did not work old motor, I will make another video on how to cut old wire and replace old motor to new motor with harness. Thank you for watching.
Please like subscribed and comments.
(Please subscribed because I might I have to make another video if the lube did not work and dryer did not work, if that happens, I will make a new video on how I remove, cut the old wire on old motor and how to install it to the new dryer motor and then into the dryer, what color of wire on the old one need to Rewire/Reconnect to the new one on what numbers and after that, does it works on a very blurry heavily photo copied instruction from a multi millions dollars corporation ?