POV Drive: 300ZX Twin Turbo | Dumped Wastegates and Pure Sound

Today I put the 300ZX through it's paces. This video is meant to give the best perspective I can to you all as to what it's like to be in the driver's seat of how this car currently moves. The Epic sound of the Twin wastegates opening up as the car get's into boost is just incredible in this car, considering it is something that's rarely heard in a Z32. Those of you that have been around on my channel has seen this engine/ car get built from the ground up. And it's just continuously improving.
Currently sitting at an easy 20 PSI the Current tire setup is struggling to gain traction in second gear and begging for more in 4th. While this entire setup is built to handle 30+ PSI of boost and make right around 1000 WHP, Better tire setup and boost by gear will obviously be necessary to reach that.
Currently utilizing the Polar Engineering V-band turbo manifolds with pulsar g25-660 turbos and Turbosmart 45mm wastegates! Merlin Machining t56 magnum swap parts with Bowler Transmission bits for the transmission!

*Check out the Website for some Z32 Merch!*
https://billybuilds.com/

Do you want to support the channel and get some stuff for your own build that I enjoy using? Below are some affiliate links to check out!

AN fittings for the oil / cooler/thermostat setup!
https://amzn.to/3WMjeNi -10AN O -ring 4 count -2 packs of these.
https://amzn.to/3YNwrqH - 10AN 90's
https://amzn.to/46xXHv1 - 120 degree 10AN
https://amzn.to/3SxFSq9 - 3 10AN 45's off thermostat
https://amzn.to/4d7uPw6 - setrab oil cooler
https://amzn.to/4dpfWF9 - Setrab oil cooler-10AN fitting
Improved racing oil filter housing/thermostat.

E-Fan setup-
Efan setup: https://amzn.to/3pfewtt -Spal 30102049 16" Curved Blade Performance Fan , Black
fan relay harness: https://amzn.to/3p4rytT

https://amzn.to/3XfvOTI Boost control solenoids:
https://amzn.to/3tCRHCf -1/4 Inch od Push to Connect Fittings Pneumatic Fittings Kit
https://amzn.to/3H4HiCi - Elbow and Straight Combination 1/4 Inch Tube OD x 1/4 Inch NPT Thread
https://amzn.to/3S7DTsW - Nylon push-connect hose
https://amzn.to/3H4HzVQ - use these to adapt to a barb fitting for regular silicone hose
https://amzn.to/48mBfFl - needed to go from the - 4an Tilton fitting to -3 on the chasebays hose.
https://amzn.to/3RKFxPM - deutsch connectors for the wiring!
https://amzn.to/3H7eetX - deutsch crimper!
https://amzn.to/3OQmnrT - Lisle 81780 Carbide Scraper Set
https://amzn.to/3OQmnrT -Permatex copper spray - For headgaskets!
Quinn 1/2" digital torque wrench -https://amzn.to/3NdbKOG - Mine is snapon, but if i had to get another this would be it.

Music:
Giraffe Squad - Wait For Me [Instrumental Trap