Creality Falcon 22W and 40W Laser Crosshairs Installation and Calibration

In this video I walk you through the installation and setup procedure of the Embrace Making Falcon 22W / 40W laser crosshairs. This module fits both models with and without the fume extraction nozzle. You can find it here:

► https://embracemaking.com/products/cr...

A laser crosshairs module is a tool designed to assist operators in aligning their workpieces efficiently and accurately. It projects a crosshair pattern onto the surface of the material, providing a visual guide for precise positioning. This feature dramatically simplifies the setup process, ensuring that your designs are flawlessly aligned before starting the engraving process.

Unfortunately the Creality Falcon 2 laser cutters and engravers do not come equipped with a laser crosshairs module making the alignment and positioning process quite cumbersome. Take the guesswork away with this upgrade!

DANGER: The laser crosshairs module is a 5mW Class IIIa red laser. Class IIIa lasers are continuous wave, intermediate power (1-5 mW) devices. Some examples of Class IIIa laser uses are laser pointers and laser scanners. Direct viewing of the Class IIIa laser beam could be hazardous to the eyes. Do not view the Class IIIa laser beam directly. Do not point a Class IIIa laser beam into another persons eyes.

Always wear your laser safety glasses when working with lasers! If you need a pair of laser safety glasses at a reasonable price, consider these here:

Laser Safety Glasses (Blue Diode / IR):
► https://embracemaking.com/products/la...

If you are a visual learner I would encourage you to watch the video to understand the install and calibration procedure. However, to supplement the video, there is a short written guide on the setup and calibration:

► https://embracemaking.com/blogs/resou...

Nominal offsets for normal planar (flat) position:

► 22W Module: X: -55mm Y: -43mm

► 40W Module: X: -60.5mm Y: -35mm

Nominal offsets for rotary position:

► 22W Module: X: -55mm Y: 0mm

► 40W Module: X: -60.5mm Y: 0mm

Haven't purchased your Creality Falcon 2 yet? Check out the following links. As an Amazon associate I may earn a small commission (at no extra cost to you):

15% OFF the NEWEST 60W Falcon 2!
► https://shareasale.com/r.cfm?b=256915...

Creality Falcon 40W:
► https://amzn.to/4kblJld

Creality Falcon 22W:
► https://amzn.to/3Orf4G3

Electric Screwdriver:
► https://amzn.to/3JRbbZe

Velcro Tie Wrap Rolls
► https://amzn.to/42jr3dX

Adhesive Cable Tie Clips:
► https://amzn.to/3dTw4VS

CPAP Hose:
► https://amzn.to/3DmcxHF

Laser Proof Silicone Work Surface Mat (20" x 28")
► https://amzn.to/3zDyMG7

Laser Proof Silicone Work Surface Mat (23.5" x 31.5")
► https://amzn.to/3A0Fzv1

Aluminum Wallet 2-Pack
► https://amzn.to/435WasF

Tall Stainless Tumbler 4-Pack
► https://amzn.to/3CWBXLh

Always remember to practice proper laser safety. These lasers can seriously harm you directly (your eyes) or indirectly (your lungs and health). ALWAYS wear your safety glasses! By-products from processing certain materials can be toxic and harm you. DO NOT CUT vinyl materials like PVC or a plastic like ABS. Check this list for hazardous materials before cutting something:

► http://wiki.atxhs.org/wiki/Laser_Cutt...

Thank you to @Creality3D for originally sending me this machine!

0:00 Intro
1:00 What's Included
1:11 Install on 22W Module
2:01 Install on 40W Module
3:13 Crosshair Alignment Squaring
5:08 Aligning a Workpiece
5:50 Calibrating Crosshair Offsets
12:22 Rotary Crosshair Position
17:09 Too Long Didn't Watch
17:45 Outro

#crealityfalcon2 #crealitylaserengraver #laserengraving

****************************************************************************

If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:

► https://www.paypal.com/donate/?hosted...

By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!

Follow me on Instagram!

►   / embracemaking