How To: Make a TRI-STAR LIGHTSABER PIXEL BLADE - Brightest in the World, Works w/Any Neopixel Saber

Get your TRI-STAR blade making kit from Civilized Sabers today!
https://civilizedsabers.com/shop/ols/...

www.CivilizedSabers.com is the place for all your lightsaber pixel needs

Follow Civilized Sabers on Instagram at civilized_sabers

PARTS LIST:
-Civilized Sabers TRI-STAR Kit https://civilizedsabers.com/shop/ols/...
-Heat Shrink in 3/8 inch clear https://www.allelectronics.com/item/h...
-Heat Shrink in 1/2 inch clear https://www.allelectronics.com/item/h...
-3535 'Skinny' strips with the white backing https://www.adafruit.com/category/168
-The Custom Saber Shop parabolic blade tip
-The Custom Saber Shop blade tube
-The Custom Saber Shop nylon diffusion tube
-Makoto foam (contact Makoto directly [email protected])

BLADE SPECS featured in this video:
-28 inches long
-Photon Green thin-walled blade tube from TCSS
-Photonic Green parabolic blade tip from TCSS (drilled out more with a drill press)
-Civilized Saber Tri-Core
-Civilized Sabers PCB

TOOLS REQUIRED:
-Soldering iron which can be temperature adjusted
-Solder flux
-Solder
-Wire Clippers
-30 AWG wire
-24 AWG wire
-double sided tape or hot glue
-super glue or acrylic glue (glue on the blade adapter for secureness and also the blade tip so it doesn't fly off)

All Civilized Sabers products are designed and produced by The Mad Science Workshoppe by JBKuma    / @madscienceworkshoppe  



#Brightest #Lightsaber #TRISTAR