Finishing the Area above the Rear doors

Hey Friends, Welcome to episode 30 of our RAM Promaster 2500 van build/conversion series. The goal today is to finish the area above the rear doors. This is one of those quirky ahd complicated areas of the van. We actually hadn’t planned on doing this until much later in the build….but we were concerned that we wouldn’t be able to reach up there once the upper cabinets were in. So, we changed our plans a bit…and here we are. This took a lot of patience because it was all trial and error….mostly error.

So, be sure and watch if you want to give this area of your van a pro-level finished look.

If you have any questions, please feel free to leave a comment below, and please give a thumbs-up if you enjoyed this video and found in helpful to you. Subscribe to our channel to follow along on our entire van build series.

Blessings to you 

Marc and Tania
---------------------------------------------------

Products we used in this episode:

1x6 and 1x4 Select Pine boards (we found it at our local lumber store)
Wood Glue
Measuring tools
Kreg jig and Screws
Cordless Drill
Wood Clamps
Foam padding to prevent squeaks
10-32 plusnuts
1450 Astro Plusnut tool
PlayDoh

Our Promaster 2500 Van Conversion Playlist:
   • Van Build Series  

If you like any of our videos, please consider subscribing. And click the notification bell to be alerted when we release a new video.

#vanbuild
#vanlife
#campervan
#vanconversion
#homeiswhereyouparkit
#vanlifediaries
#homeonwheels
#projectvanlife