BMW E46 M56 Valve Cover Installation DIY

You can find this cover, gasket, wiring harness set if you search on eBay for "M56 Valve Cover": https://goo.gl/RjjMjz

E46 Valve Cover Gasket Replacement:    • BMW 330i 325i E46 Valve Cover Gasket Repla...  
E46 Common Repair Steps:    • BMW 330i 325i E46 Common Repair Steps DIY  

Neiko Wire Stripper & Crimpers: http://amzn.to/2nbne7T
Channellock Diagonal Cutters: http://amzn.to/2FalEdZ
Stanley Fatmax Pocket Screwdriver: http://amzn.to/2E65ZNh
Terminal Release Tool Kit: http://amzn.to/2DxwB8U
Blue Heat Shrink Butt Connectors: http://amzn.to/2GbwilT
Neiko Long Allen 3/8" drive Set: http://amzn.to/2DxGvHE
E46 CCV Kit (to get the fittings from): http://amzn.to/2DKuGRI

The part number for the M56 valve cover to intake manifold hose is: 11157513756
And you can buy it here: http://amzn.to/2FffpWq

MS42/MS43 pinouts for 9 pin connector X60005 (coils that bolt into cover):
Pin 1: Coil 3, black/yellow
Pin 2: Coil 2, black/red
Pin 3: Coil 1, black/white
Pin 4: not used
Pin 5: Ground, brown, thick
Pin 6: Ground, brown
Pin 7: Coil 6, black/purple
Pin 8: Coil 5, black/green
Pin 9: Coil 4, black/blue

MS45 pinouts for 9 pin connector X60005 (coils that push into cover):
Pin 1: Coil 5, black/green
Pin 2: not used
Pin 3: not used
Pin 4: Coil 3, black/yellow
Pin 5: Ground, brown, thick
Pin 6: Coil 1, black/white
Pin 7: Coil 2, black/red
Pin 8: Coil 4, black/blue
Pin 9: Coil 6, black/purple

My mailing address for correspondence or swag of any kind is on my about page.

This video is for entertainment purposes only. 50sKid assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.