How to Replace Front Brakes 1999-2007 GMC Sierra

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com https://trq.video/ig-1ABFS01425
New Brake Rotor Set from 1AAuto.com https://trq.video/if-1ABFS03691
New Brake Pads from 1AAuto.com https://trq.video/ii-1ABPS02520

Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 1999-2007 GMC Sierra.

• Check here for more videos on the 1999 to 2007 GMC Sierra 1500.    • GMC Sierra 1999-2007 2nd Generation  

This repair was done on a 2004 GMC Sierra 1500 SLT 5.3L Extended Cab Pickup 4-Door and the process should be similar on the following vehicles:
1999 GMC Sierra 1500
2000 GMC Sierra 1500
2001 GMC Sierra 1500
2002 GMC Sierra 1500
2003 GMC Sierra 1500
2004 GMC Sierra 1500
2005 GMC Sierra 1500
2006 GMC Sierra 1500

Tools you will need:
• Flat Blade Screwdriver
• Pry Bar https://trq.video/osk-1AXAA00020
• 10mm Socket
• 18mm Socket
• 22mm Socket
• Blowtorch
• Brake Caliper Compressor Tool. Dual Piston. Pump Style.
• Brake Caliper Hanger https://trq.video/odo-1AXAA00439
• 3/8 Inch Impact Gun
• T55 Torx Socket
• Socket Driver
• Torque Wrench https://trq.video/oKQ-1AXAA00044
• Brake Parts Cleaner
• Copper Anti-Seize
• Liquid Thread Locker
• Paper Towels
• Rust Penetrant
• Floor Jack
• Jack Stands
• Pick https://trq.video/opn-1AXAA00037
• Wire Brush https://trq.video/ohp-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
GMC Sierra 1999-2007 2nd Generation:    • GMC Sierra 1999-2007 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.