Ender 5 enclosed lid and heated chamber guide

My modification of the Creality Ender 5 continues! The aim is to enclose it and heat the build chamber and be able to print high temp engineering plastics that usually warp and delaminate.

In this video, I design and fit a custom handle, construct a removable lid with 2020 extrusion, acrylic and printed parts, and fit a chamber heater. Everything is shown step by step with instructions on configuring Marlin firmware. Printed parts are below.

There will be a follow up video showing the final versions in action printing Nylon, Polycarbonate and ABS.

Some notes:
With the lid the chamber hits just over 40 deg C without the chamber heater on.
The chamber heater only adds a couple of degrees.
You need a high power heater to be able to heat the chamber up to a useful temperature.
The heater I put together is under powered, but still adds load to the mainboard MOSFET and PSU. It is better to remove some of that load.
I have mans powered bed on the way. This means I can free up the PSU and heated bed MOSFET for a more powerful chamber heater.
I could alternative run another solid state relay to switch on and off a mains powered heater based on a hair dryer or heat gun. This will be efficient but adds safety risks.
At higher tempos I will need to insulate parts of the enclosure, such as the PLA printed electronics case.
My torture test is very difficult for ABS. Pointy edges but a tall and bulky middle section is very prone to shrinking and curling up.

My thing with printed parts and cutting list: https://www.thingiverse.com/thing:386...
Part 1 of this series:    • Enclosed Ender 5 for high temp filaments -...  
Part 2 of this series:    • Ender 5 SKR V1.3 & MKS Gen L guide + custo...  
Marlin M141 reference: http://marlinfw.org/docs/gcode/M141.html
Peopoly heater (great for resin but not recommended for this application): https://peopoly.net/products/peopoly-...
Filament temperature reference page: https://all3dp.com/2/the-best-printin...

Purchase the Ender 5 from these links:
Amazon: https://amzn.to/2SApPXG
Banggood (code en3d501 ): https://www.banggood.com/custlink/33D...
eBay: https://ebay.to/2CUThSV
Creality: https://bit.ly/2VwMAfy

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Take a look around and if you like what you see, please subscribe.

Support me on Patreon:   / teachingtech