How To: Honda CRF300L/ Rally Nitron Racing R1 Rear Shock Installation 4K

How To: Honda CRF300L/Rally Nitron Racing R1 Rear Shock Installation 4K

This is my video of the removal of the stock rear shock from my Honda CRF300 Rally (It's the same process for the CRF300L, though the bodywork removal is different.)

I think do a side by side comparison of the stock and Nitron Racing R1 shock, including checking the weights of both, before installing the Nitron shock on the bike.

This video doesn't cover the bodywork removal or refitting, so if you need that, please see my other videos.

If you want a brief summary of what you need to do it's:
1. Remove body panels
2. Unhook rear brake pedal spring
3. Remove lock nuts from forward 'bones' linkage and upper shock bolt
4. If you can, loosen the lower shock nut before you lift the bike
5. lift the bike so that the rear wheel is only just on the ground

DO NOT SECURE THE BIKE USING THE SWING ARM

6. Remove the bolts from the shock and bones and remove down through the bike
7. Fit the new shock, and grease all bolts as you reassemble.
8. Take it off the stand and torque everything up

Ride safe!

00:00 Introduction
01:32 Unboxing....
03:38 Removal of stock shock
11:27 Side by side comparison
12:53 Weigh in
13:57 Nitron R1 installation
25:05 Conclusion

I hope this video has been useful, and if it has, please like and subscribe and I'll see you next time.
Thanks,

https://www.nitron.co.uk/products/mot...

#Crf300 nitron
#Crf300 rally nitron
#Crf300l nitron
#Crf300 rally shock
#honda crf300l rally
#dual sport