How to Replace Front Lower Control Arms 05-10 Chrysler 300

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com https://1aau.to/ia-1ASLF00164

1A Auto shows you how to repair, install, fix, change or replace loose, worn, or creaking ball joints. This video is applicable to the 05, 06, 07, 08, 09, 10 Chrysler 300.

This repair was done on a 2006 Chrysler 300 and the process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300

🔧 List of tools used:
• 21mm wrench
• 22mm Wrench
• Complete Metric Socket Set
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench https://1aau.to/oLa-1AXAA00044
• Gloves https://1aau.to/ojz-1AXSS00048
• Rust Penetrant
• Safety Glasses
• 6mm Allen Wrench
• Floor Jack
• Hammer
• Jack Stands

Subscribe:    / @1aauto  

Check out our playlist:
Chrysler 300 2005-10 1st Gen:    • Chrysler 300 2005-10 1st Gen  

For More Info visit us at https://1aau.to/h-ayF

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.