Model 120 short Alert and Attack (Head only)

NOTE: this is the rotor only, and 4 ports have been covered for the true sound to be heard, running the head alone with all stator ports open will allow you to hear the 16 port frequency, but with the connector piece at the bottom for the blower and it all sealed will make the true sound heard here.

Well, I got a plug wired up tapped into the spas junction box since it’s the only 240 volt power source we have.

Thanks to the help from Connor on having everything on hand to install this, and again, this plug won’t be powering it once the siren is fully completed, this is only to run the head since the 50 amp circuit won’t be able to handle both blower and chopper motors at the same time, primarily the blower motor.

As you can tell, I’m using the breaker as a switch from the main panel on the house since I haven’t installed a breaker switch on the junction box specifically to turn power on and off to the outlet of which the siren plugs into, so using the breaker it turns off power to the spa as well.