How to Install the GlafenSaab 2010-2011 Saab 9-5 Rear LED Tail Light Conversion Kit

Welcome to the Channel! In today's episode I install the GlafenSaab rear LED tail light conversion kit. This is an easy kit to install and only needs a few tools to get the job done.

The video is a bit long, however I wanted to make sure to 100% document the entire process and include any issues I ran into since you may run into the same. Please let me know of any questions in the comments below.

Check your tail light holders before installation to verify whether yours are damaged or not.

Tools/Supplies Needed:
Wire Cutters
Wire Strippers
Electrical Tape (Optional)
Painters/Masking Tape (Temporary for holding the resistor on while the epoxy dries.

Buy The Kit:
GlafenSaab E-Bay Store: https://www.ebay.com/str/glafensaab

eSaabParts: https://www.esaabparts.com/saab/parts...

Tail Light Holders:
https://www.esaabparts.com/saab/parts...

Tail Light Wing Nuts:
https://www.esaabparts.com/saab/parts...

Installation Instructions: https://drive.google.com/file/d/16Su6...

GlafenSaab on Facebook:   / 415657922231075  

WIS: http://saabworld.net/showthread.php?t...

Thank you for viewing my video! There will be more to come.

Don't Forget to follow me
E-Mail: [email protected]
Website: www.saabdr.com
Instagram: @thesaabcollector
Twitter: @saabdrwi
Facebook: Saab Dr -   / saabdr  

This video is to be a guide to help people see how to work on their Saab. If you want to see the exact factory directions please look at the Saab Workshop Information System referenced above (WIS). That will give you the exact factory Saab tech guide to working on your Saab. This method incorporates tricks learned from years of working on Saabs. If you have any questions please let me know. This channel is not liable for any injury or death that may occur from someone working on their car. Thank you!