Code 10 / Alley Docking

Alley Docking
LMV from the left and right; HMV from the right only)

Alley docking is reversing into a demarcated parking bay and then driving out again. You have 2 attempts, and you must not hit any obstacles including the kerb. Only combination vehicles (like a truck pulling a trailer) are allowed any forward movements (one). Touching a line with a wheel will result in the end of the test. You will need to perform alley docking to the left and to the right.

Check the mirrors and the blind spot.
Signal intention.
Select gear.
Obtain clutch control (manual).
Observe 360 degrees (Rear-view mirrors and blind spot if applicable) 6.
Release the handbrake.
Move off.
Check the blind spot (right blind spot if alley docking to the left; left blind spot if alley docking to the right).
Steer into the area without touching any obstacles.
Stop within the demarcated area.
Apply the handbrake.
Select neutral or park.
Cancel the signal Carefully drive out without hitting any obstacles using the Moving Off procedure. Make sure you steer properly out of the demarcated area