Edwards Jaws 55 ton Ironworker with Tube Notcher Tooling In-Use - Trick-Tools.com

5 ton Ironworker: https://www.trick-tools.com/Edwards-J...

The Jaws 55 ton Ironworker is our best selling ironworker. Featuring four available workstations, the Jaws 55 ton incorporates a universal open tooling cavity that can hold a variety of optional tool sets, a 14 inch bar shear, angle shear and heavy-duty punch station as standard features.
This Edwards ironworker is also equipped with an electric stroke control. This easy-to-adjust system speeds up production time by limiting the stroke of the machine to just enough to complete the task at hand. It can also be helpful when using special tooling that requires a limited stroke to perform properly.

Like all Edwards machines, this unit works in a completely vertical motion - straight down on the work. There is no arc of tool against the material to be cut or punched. All stations operate as a unit so you can move from punch to shear to angle shear without changing or adding any new equipment.

Choose the optional Hydraulic Accessory Port in order to use your Edwards Ironworker hydraulics to power a growing selection of machines like Shop Presses, Press Brakes, Tubing Benders and Rollers.

Warranty: 1 year manufacturer's warranty

Pipe notcher housing: https://www.trick-tools.com/Pipe_Notc...

This Notcher Housing will work in many different types of presses or ironworkers. Dies are available for tube or pipe sizes. This type of notcher is typically good for 90 degree notches only. Call us for other angles and sizes not listed.
See accessories tab for punch & die sets required for each desired notch size.

Warranty: 1 year manufacturer's warranty

Round Tubing Die selection: https://www.trick-tools.com/Round_Tub...

This tooling fits into a housing (not included) to create a bump-style notching tool for making 90 degree copes in round tubing (OD). Suitable for production work in an ironworker or press. Click part number in chart for more details.

Nomina Pipe die selection: https://www.trick-tools.com/Nominal_P...

This tooling fits into a housing (not included) to create a bump-style notching tool for making 90 degree copes in round PIPE (NPS). See chart for PIPE size reference and corresponding outside diameter. This tooling is suitable for production work in an ironworker or press. Click part number in chart for more details.

Trick-Tools.com
[email protected]
1.877.VAN.SANT