JOIN FLEECE BACKED EPDM TO PITCHED ROOFS ONTO LEAD FLASHING USING 6 INCH COVER TAPE - FLEXIPROOF®

In this newly updated EPDM roofing video tutorial, you’ll learn how to correctly join FlexiProof Fleece Backed EPDM to pitched roofs using lead flashing and Cured Cover Tape.

Using the right tools, materials, and techniques, Fleece Backed EPDM joined to pitched roofs will create a watertight seal and protect the edges of both roofs for decades. Let’s master this EPDM rubber roof detail together!

Contact us with questions or to learn more about our EPDM roofing training: https://www.flexiproof.co.uk/the-epdm...

Learn more about the FlexiProof EPDM flat roof system: https://www.flexiproof.co.uk

Tools required:
• Wood router
• Scissors
• Tape measure
• Scribe
• Spirit level
• Solvent resistant paintbrush
• Silicone roller
• Penny roller

Materials required:
• Lead Flashing
• FlexiProof 6 inch Cured Cover Tape
• FlexiProof EPDM Primer

Things to be aware of:
• The prepared roof surface must be clean, dry, and free from dust and contaminants (bitumen, oil, etc).
• Be sure to route the roof deck edge to the required width and depth to correctly sink the lead flashing.
• Always use a solvent-resistant paintbrush to apply FlexiProof EPDM Primer.
• Make sure the primer is touch dry and still tacky before applying FlexiProof 6 Inch Cured Cover Tape.
• Use a silicone roller and a penny roller to apply pressure to - and fully activate - the cover tape for a strong and long-lasting bond.