honda pilot coolant change 2006 2007 2008
Автор: the occasional mechanic
Загружено: 2023-10-26
Просмотров: 17957
honda pilot coolant change 2006 2007 2008
including the lengthy chilton method of bleeding the coolant
7mm inner diameter tubing http://tiny.cc/jvycvz
0:00 preparation to draining coolant
0:09 drain radiator
0:58 install tubing on radiator drain outlet
7mm ID tubing x 3.5ft long
1:11 loosen drain plug
22mm socket
1:33 old coolant vs. new coolant appearance
1:46 drain engine block
engine block drain cock location
1:60 loosen engine block drain cock
12mm socket + 9" cheater bar
2:08 install tubing on engine block drain cock
7mm ID tubing x 3.5ft long
2:27 tighten engine block drain cock
7.4ft lbs
2:40 coolant reservoir location
2:59 drain coolant reservoir
3:15 honda extended life coolant type 2
3:24 add coolant
1 gallon 2 quarts 13 ounces
3:30 steps 1-6 bleed air out of cooling system
3:38 steps 7-10 bleed air out of cooling system
3:54 radiator fan locations
3:62 step 1
4:15 check thermostat open by temp of radiator hose
4:33 watch engine temp - not more than half-way
5:01 step 2
5:35 measure interior temp by rear heat vents
5:45 step 7
6:07 step 8
6:17 air flow temp vs. interior temp graph
6:36 listen for water flow near rear heat vents
6:51 fill coolant reservoir, max + 14 additional ounces
7:17 pour off excess coolant once car and coolant have cooled
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке: