Sovol Sv06 Ace Plus Review and Troubleshooting
Автор: NJ Auto
Загружено: 2025-10-01
Просмотров: 302
This is a quick review and talking about a lot of the issues I had with the Sovol Sv06 Plus Ace.
Biggest issues were the usb drive received with the machine would often corrupt. Best suggestions is to power off the 3D printer before removing the drive. This seemed to solve this issue entirely. If you drive is corrupted make sure your plug it in to your computer and re format the drive.
Second major issue was over extrusion, orca slicer will default to 1 for flow rate. Do a flow rate test.
After ding a flow rate test I found that .93 flow and .04 pressure advance seemed to be the best for me. I’ve been printing .15 layer height and getting good detailed prints since then.
I recommend calibrating every time after the machine is turned off (It takes about 15 minutes)
and if the machine seems to be way off or you hear motors hitting their stoppers and grinding/whining. Stop your print and go to settings a preform a factory reset.
Overall this is an amazing budget 3d printer that does almost everything automatically and is very fast and user friendly.
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
