How to Replace Rear Calipers 2008-2012 Honda Accord
Автор: TRQ
Загружено: 2025-05-16
Просмотров: 309
Buy Now!
New Brake Caliper from 1AAuto.com https://trq.video/ic-1ABCR00133
This video shows you how to install new rear calipers from TRQ on your 2008-2012 Honda Accord. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.
Estimated installation time for a professional technician is approximately: 1 hour 48 minutes
This repair was done on a 2009 Honda Accord EX-L 3.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord
Tools you will need:
• 10mm Wrench
• 17mm Wrench
• 11mm Socket
• 12mm Socket
• 14mm Socket
• 17mm Socket
• 19mm Socket
• 1/2 Inch Impact Gun
• 3/8 Inch Impact Gun
• Torque Wrench https://trq.video/obTN-1AXAA00044
• Brake Fluid
• Brake Parts Cleaner
• Gloves https://trq.video/ocoh-1AXSS00048
• Safety Glasses
• Silicone Brake Parts Lubricant
• Drain Pan
• Floor Jack
• Jack Stands
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке: