How to Build a MINI OFFSET SMOKER!

How to Build a Mini Offset Smoker! The step by step tutorial on how to build a DIY SMALL OFFSET SMOKER, with only scrap metal has arrived! Ideal for those living in apartments or with limited outdoor space, this smoker will do everything you need it to at a lower price and smaller size!

This video will take you through step by step on the entire process of making this DIY Smoker, from measuring all the way to firing it up and cooking.

Website - https://unimig.com.au/

Links to Machines used -
Viper 180 AC/DC - https://unimig.com.au/product/viper-1...

Viper Cut 30 - https://unimig.com.au/product/viper-c...

Required Powered Equipment - (* = optional)
TIG Welder (180 AC/DC)
Plasma Cutter (Viper Cut 30)
*Drop saw
*Oxy-Acetylene
Grinder (Cutting wheel, Flap disk)
*Drill Press (Can use Power Drill) - 3mm, 5mm, 6mm & 10mm Drill Bits

Required Hand Tools -
Combination Square
Straight edge
Phillips head screwdriver
Right Angle magnets
Rule
Engineers chalks
Measuring tape
Centre punch
Hammer
File
Clamps

Materials -
3mm Plate -
4x 410 x 150mm
2x 150 x 150mm
2x 120 x 120mm
3x 130 x 120mm
1x 300 x 200mm (Scrap for excess)

5mm Plate -
360 x 130mm

Square Hollow Section - (30 x 30 x 2mm)
2x 130mm
2x 125mm
2x 150mm
1x 40mm
1x 100mm

Angle - (20 x 20 x 1mm)
1x 410mm
2x 150mm

Accessories -
3x Small Hinges
50 x 50mm Scrap Mesh
6mm Round Bar (100mm long)
2x M3 bolts (15mm long)
1x M3 bolt (25mm long)
1x small spring
2x small washers

Disclaimer - We are not ‘Smoker Building Experts’ nor “Smoker Cooking Experts’. We understand there may be better / different ways to make this project, however, this is how we did it.