How to Replace Rear Trailing Arm 2006-2011 Cadillac DTS

Buy Now!
New Trailing Arm from 1AAuto.com https://trq.video/ia-1ASFK01963
New Trailing Arm from 1AAuto.com https://trq.video/ia-1ASRL00075

This video shows you how to replace the rear trailing arm on your 2006-2011 Cadillac DTS.

This repair was done on a 2010 Cadillac DTS Platinum 4.6L and the process should be similar on the following vehicles:
2006 Cadillac DTS
2007 Cadillac DTS
2008 Cadillac DTS
2009 Cadillac DTS
2010 Cadillac DTS
2011 Cadillac DTS

Tools you will need:
• 18mm Socket
• 19mm Socket
• 3/8 Inch Impact Gun
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet https://trq.video/o75-1AXAA00017
• 3/8 Inch Drive Ratchet https://trq.video/oagM-1AXAA00015
• Socket Extensions https://trq.video/oagM-1AXAA00015
• Swivel
• Torque Wrench https://trq.video/oPY-1AXAA00044
• 5/16 Inch Wrench
• Gloves https://trq.video/okL-1AXSS00048
• Marker / Writing Utensil
• Safety Glasses
• Floor Jack https://trq.video/oxZ-1AXAA00068
• Jack Stands https://trq.video/owd-1AXAA00065

Subscribe:    / @trq  

Check out our playlist:
Cadillac DTS 2006-2011 1st Generation:    • Cadillac DTS 2006-2011 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.