Haier 150-1708 Automatic Washing Machine vibration Problem solved

Haier 150-1708 Automatic Washing Machine vibration Problem solved #haierwashingmachine#150_1708
Got it 👍 You’re facing vibration issues in your **Haier 150-1708 automatic washing machine**. This is a common problem with automatic washers, especially during **spinning**. Here are the main causes and step-by-step solutions:

---

🔧 Common Causes & Solutions

1. *Machine Not Leveled*

Cause: If the washing machine is not sitting evenly on the floor, it will vibrate a lot during spin.
Solution: Adjust all four legs of the washing machine until it is completely balanced. Use a spirit level if possible.

2. *Load Imbalance*

Cause: Heavy clothes (blankets, jeans, towels) gathered on one side of the drum cause uneven spinning.
Solution: Pause the machine, open the lid, and redistribute the clothes evenly. Avoid overloading.

3. *Shock Absorbers/Worn Suspension Rods*

Cause: In Haier top load models, the *suspension rods/springs* support the drum. If they get weak, the machine shakes excessively.
Solution: Check suspension rods and springs inside the cabinet. Replace if weak or broken.

4. *Loose Motor or Drum Bolts*

Cause: The motor or tub may have loosened with time.
Solution: Tighten all drum and motor mounting bolts.

5. *Damaged Bearings*

Cause: If you hear grinding noise along with vibration, bearings may be worn.
Solution: Bearings need to be replaced (requires technician).

6. *Transit/Shipping Bolts (for new machines)*

Cause: If it’s a new machine, sometimes the *transit bolts* at the back are not removed.
Solution: Remove all shipping bolts before use.

---

✅ Quick Fix Checklist

Place machine on a flat, solid surface.
Adjust legs properly (no wobble).
Don’t overload; distribute clothes evenly.
Check suspension rods if vibration continues.

---

⚠️ If the vibration is *too severe* (machine “walking” across the floor), most likely the *suspension rods* need replacement — this is a common issue with Haier models after 2–3 years.

Would you like me to guide you on *how to check and replace the suspension rods* step by step at home, or do you prefer technician-level repair info?