Train Simulator 2017: CSX C30-7 Startup
Автор: TrainSimUSA
Загружено: 2017-02-01
Просмотров: 28435
Startup procedure as stated in the manual.
1). Move the Engine Control switch to the “Start/Isolate” position.
Close the following breakers on the rear control panel:
Fuel Pump, Excitation, Local Control, Control, Dynamic Brake.
Close the following breakers near the toilet:
Inverter, Charging Circuit, Inverter Control Circuit.
Then close the three switches on the Control Stand.
Gen Field, Fuel Pump, and Control.
Open the engine doors and press the pre-lube/Prime button. Takes a about a minute of holding. Then the start light will illuminate. Press start for about 2 seconds.
Then turn the isolation switch to Run. If done correct, no alarm bells will ring. If not, then a bell will sound and the engine will shutdown.
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
![Train Simulator 2017 - [CSX C30-7] Sandbaggin' - 4K UHD](https://imager.clipsaver.ru/6pcdMyva6W8/max.jpg)
![Train Simulator Classic - [GE C30-7] - BSRR Quarry Transfer - 4K UHD](https://imager.clipsaver.ru/6uQyz64uggA/max.jpg)
![Train Simulator 2022 - [EMD SD40-2] - Double Stack 99 Pt.1 - 4K UHD](https://imager.clipsaver.ru/Nbr3ffk7Zss/max.jpg)
