DIY: How to Change the Speaker in Your Peugeot 207”

How to Replace a Speaker in a Peugeot 207

1. Disconnect the Battery
Start by disconnecting the negative terminal of the battery to avoid any electrical issues.

2. Remove the Door Panel
• Use a trim removal tool or flathead screwdriver to carefully remove the plastic covers hiding the screws.
• Unscrew all visible screws (usually near the handle, armrest, and lower door area).
• Gently pry off the door panel, starting at the bottom and working your way around. Lift the panel upwards to release it from the window ledge.

3. Disconnect the Old Speaker
• Locate the factory speaker mounted inside the door.
• Unscrew it and disconnect the wiring harness attached to the back.

4. Install the New Speaker
• Connect the new speaker to the wiring harness.
• Secure it in place using the same screw holes (you may need an adapter bracket if the new speaker doesn’t fit perfectly).
• Test the speaker before reassembling the door.

5. Reattach the Door Panel
• Align the panel with the window edge and press it into place.
• Screw everything back in and reattach any trim covers.

6. Reconnect the Battery
Turn on the stereo and test the sound to make sure everything works properly


That’s it for today’s guide on how to replace the speaker in your Peugeot 207! Hopefully this helped you get better sound in your ride without too much hassle. If you found this useful, don’t forget to like, subscribe, and hit the notification bell so you don’t miss the next DIY car tip. Thanks for watching — see you next time✅