How to Replace Pinion Seal & Yoke 1998-2011 Ford Ranger

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-553-g

The differential Pinion Flange is part of the universal joint that connects the drive shaft to the rear differential. Years of water and salt could rust or seize the flange, or cause other problems. This video shows you how to install a new TRQ differential pinion flange on your 1998-2011 Ford Ranger.

• Check here for more videos on the 1998-2011 Ford Ranger:    • Ford Ranger 1998-2011 3rd Generation  

This repair was done on a 2006 Ford Ranger XLT 4.0L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger

Tools you will need:
• Pry Bar https://trq.video/ou2-1AXAA00020
• 10mm Wrench
• Bearing Race and Seal Driver https://www.1aauto.com/*/i/1axaa00038...
• 3/8 Inch Impact Gun
• Ratchet
• Socket Driver
• Swivel
• Torque Wrench https://trq.video/oRD-1AXAA00044
• Copper Anti-Seize
• Liquid Thread Locker
• Paper Towels
• Petroleum Jelly
• Rust Penetrant
• Drain Pan
• Floor Jack
• Grinder
• Jack Stands
• Pick https://trq.video/or6-1AXAA00037
• Razor Blade / Gasket Scraper
• Rubber Mallet
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Ford Ranger 1998-2011 3rd Generation:    • Ford Ranger 1998-2011 3rd Generation  

📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.