How to Replace Inner Fender Liner 2005-2010 Dodge Dakota

Buy Now!
New Inner Fender Liner from 1AAuto.com https://trq.video/ia-1ABMX02860

This video shows you how to install an inner fender liner on your 2005-2010 Dodge Dakota. Fender liners protect the body and engine compartment of your vehicle from road debris, water, dirt, sand, and the like. If yours is worn, ripped, damaged, or missing, it’s a good idea to install a new one to protect your vehicle.

This repair was done on a 2009 Dodge Dakota Big Horn 4.7L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2005 Dodge Dakota
2006 Dodge Dakota
2007 Dodge Dakota
2008 Dodge Dakota
2009 Dodge Dakota
2010 Dodge Dakota

Tools you will need:
• Phillips Bit in a Ratchet
• 22mm Socket https://trq.video/onn-1AXAA00266
• 7mm Socket https://trq.video/oaYv-1AXAA00017
• Trim Tool Set https://trq.video/o4I-1AXXX00006
• Ratchet https://trq.video/obr3-1AXAA00016
• Socket Extensions https://trq.video/obhs-1AXAA00015
• Torque Wrench https://trq.video/oavL-1AXAA00044
• Gloves https://trq.video/oNN-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oWq-1AXAA00068
• Hammer
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Dodge Dakota 2005-2010 3rd Generation:    • Dodge Dakota 2005-2010 3rd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.