2005-2010 Hyundai Sonata 2.4L Automatic Transmission Fluid Pan Replacement
Автор: Jonathan Cardenas
Загружено: 2025-08-10
Просмотров: 1103
Here is a quick video showing how to replace the automatic transmission fluid pan in a 2009 Hyundai Sonata (2.4L motor). This should apply to 2.4L Sonatas built between 2005 and 2010.
You'll need the following:
10mm, 12,mm and 13mm sockets (1/4 or 3/8)
1/4 inch and 3/8 ratchets
1/4 inch torque wrench (inch pounds)
3/8 torque wrench
Miscellaneous extensions
At least four (4) quarts of transmission fluid (Valvoline max life multi-car is good, anything should work as long as it meets the Hyundai SPIII spec)
Permatex Automatic transmission RTV Sealant (Amazon affiliate link - https://amzn.to/40Yv8Fs)
Torque specs are as follows:
Transmission drain plug: 20-24 ft/lbs (this worked for me but per ALL-Data, you can go between 28-36 ft/lbs). Go with a lower spec and tighten if needed.
Transmission pan bolts: 9.4 - 10.8 ft/lbs (112.8 - 129.6 inch/lbs)
Part numbers:
Transmission pan: 45283-3A200
Bolts (x15): 11405-06126-K
Transmission drain plug gasket: 21513-11000
You don't necessarily need new bolts (mine were fine albeit a bit rusty) however, since your pan is rusting out, the odds that some bolts are rusty as well is high. I probably only had to replace the bottom few bolts but they are cheap so why not replace them all.
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
