Visualization of the Pulse Jet Baghouse Operation for air dust collection. Model: Blizzard NEW

Torch-Air grants permission to use this visualization of the dust collector or scrubber operation on your websites, presentations, and videos, provided that an active link (shown below) is included.
https://torch-air.com/products/baghou...
More information https://torch-air.com/

Equipment selection and calculation department: [email protected]

Sales and Production Facility in Oklahoma: +1 (918) 406-5684
#dustcollector #baghouse #dustcollectorsystem #torchair #airfilters #airpurifiers

Sales Office in California:+1 (213) 403-6530

High-Efficiency Pulse-Jet (compressed-air cleaning) Baghouse with Flat-Bag or Round-Bag Options

🔧 Key Specifications & Features

Airflow / Capacity: Approx. 600 – 235,000 CFM (≈ 1,000 – 400,000 m³/h) per module.
torch-air.com
+1

Filtration efficiency: Up to 99.9% for particles ≥ ~200 nm (depending on dust type, temperature, humidity).
torch-air.com

Bag type: Flat-section bags (compact design) or optional round bags; metal cages.
torch-air.com

Cleaning system: Pulse-jet compressed-air cleaning: receivers, diaphragm valves, blow-pipes.
torch-air.com
+1

Operating temperature: Standard up to ~300 °F (~150 °C); optional designs up to ~660 °F (~350 °C) for high-temp applications.
torch-air.com

Dust concentration inlet / outlet: Typical inlet up to ~50 ppm (g/m³); outlet standard ~0.005–0.01 ppm (5–10 mg/m³); optional ~0.001–0.005 ppm.
torch-air.com
+1

Construction / Options: Modular design (bolt-together), flat bags, damper plate for gas inlet, hopper discharge options, explosion-safe versions, anti-static media.
torch-air.com

Installation flexibility: Suitable for both positive pressure and negative pressure (fan suction).
torch-air.com

📌 Typical Applications

This model is well-suited for a broad range of industrial sectors, including:

Chemical, petrochemical, oil & gas process streams

Wood-processing, paper, plastics and glass manufacturing

Mineral extraction, cement, asphalt, and concrete plants

Any facility requiring high-efficiency dust collection across variable air volumes and dust loads

✅ U.S. Specification Checklist (OSHA / NFPA / EPA Considerations)

When specifying this baghouse for a U.S. facility, ensure you collect/address the following:

Required volumetric flow (CFM) and inlet dust loading (g/m³ or ppm)

Dust characteristics: particle size distribution, adhesion/abrasiveness, moisture content, temperature

Gas stream conditions: temperature, chemical composition, pressure (positive/negative)

Target filtration efficiency or outlet emission (mg/m³ or ppm) per permit or regulatory requirement

Installation environment: indoor vs outdoor, ambient temperature extremes, mounting/foundation, service access

Construction/options: explosion relief panels, anti-static bags, grounding, insulation/heating for ambient or process needs

Dust discharge system: manual gate, automatic gate, worm conveyor, big-bag unloading if required

Service & maintenance access: bag replacement path (top access or front access), hopper access, compressed-air system maintenance

Structural support/foundations: large modules may require engineered foundations, anchorage, vibration isolation

Compliance: ensure unit meets U.S. EPA emission limits, NFPA combustible dust guidelines, OSHA worker exposure standards