CFMoto Ibex 450 Project Ep. 1 – Adding OEM Driving Lights (Stage 1: Lighting Upgrade)
Автор: Broken Nickle Garage
Загружено: 2025-11-11
Просмотров: 294
Stage 1 of the CFMoto Ibex 450 Project kicks off with lighting!
In this episode, I install the OEM driving lights and walk through the full process — mounting, wiring, and final night test results.
I’ll show how this simple upgrade improves visibility, safety, and night-time confidence for anyone riding or camping off-road.
👉 Next up: Stage 2 – OEM upper and lower crash bars!
I did some research and the "Y" harness does plug into the square headlight connector just below the headlight and can be accessed on the left side of the motorcycle. I did remove the left side plastic cover and the left side plastic frame, which required removing the seal. I do point that out in the Ep. 3 video of electrical upgrades to the IBEX 450.
Tools used:
-4mm & 5mm Allen Socket
-Phillips screwdriver standard length and a stubby
-Standard flat tip screwdriver
-10mm and 13mm socket
-10mm wrench
-Drill and a 3/8inch drill bit
-Long needle nose pliers
-Plastic trim tool (for side panel removal)
-Zip Ties
-Blue Loctite
#CFMoto #Ibex450 #AdventureBike #MotorcycleUpgrades #ADVBuild
#dualsportmotorcycle, #runninglights,#foglights,
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
