KLX110 Rear Spring Installation | Pit Bike Rear Spring Upgrade | BBR Pit Bike Shock | Partzilla

See how to replace the rear shock spring on a KLX110 in this video from Partzilla.com!

When you’re building a pit bike, the size and weight of an adult rider on a small bike drives a lot of the modifications. Today, we’re concentrating on the weight, and that means upgrading the rear shock spring on our KLX110.

We’ve chosen a BBR replacement rear spring for our KLX, and that will add enough load-bearing capacity.

In this video, John will walk you through how to replace the rear shock spring on your KLX110 step-by-step. We’ll remove the seat and gas tank so we can disconnect the shock. With that done, John will introduce you to a Motion Pro rear shock spring compressor that we’ll use to get the old spring off and get the new, beefier BBR spring installed.

Once that’s done, we’ll get the shock back on the bike.

We also rebuilt the front fork on this KLX110. Check that out here:    • KLX110 Fork Rebuild | Pit Bike Front Fork ...  

Check our the parts and tools we’re using here:

Motion Pro shock spring compression tool:
https://www.partzilla.com/product/aft...

BBR rear shock spring:
https://www.partzilla.com/catalog-pro...

Read how to do this job step-by-step:

https://www.partzilla.com/blog/kawasa...

VIDEO HIGHLIGHTS:
Introduction - 0:00
Removing gas tank and seat - 1:00
Disconnecting the shock - 1:30
Removing old spring - 2:00
Installing the spring - 3:15
Remounting the shock - 4:30

Buy OEM Kawasaki motorcycle parts here:
https://www.partzilla.com/catalog/kaw...

Talk to us:
Twitter (X):   / partzilla  
Facebook:   / partzilla  
Instagram:   / partzilla  

In the video we’re working with a 2006 Kawasaki KLX 110, but you will have similar steps for your Kawasaki dirt bike. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.