BM-22AD Turret Milling Machine HAFCO Metalmaster (M593D)

http://www.machineryhouse.com.au/M595D
BM-22AD Turret Milling Machine HAFCO Metalmaster (M593D)

Features
3-Axis digital readout counter fitted with 2-Axis X & Y scales only
3hp, 240V motor, 8-speeds V-belt drive system
NT30 Spindle taper with a chrome & ground quill
Hardened & ground work table & slide-ways
All slides utilise dovetail construction for maximum rigidity
Meehanite casting for high strength & minimal deformation
Quality electrics & overload protection in an easy access enclosure
Horizontal travelling ram mounted on a rotating base allowing re-positioning of spindle
The ram incorporates a tail lug (spigot) to accept a slotting attachment etc.
High / neutral and low gear selection lever to maximise torque
Asong X-Axis power-feed with adjustable micro switch feed stops
Metric dial graduations @ 0.02mm for X , Y & Z-Axis
Automatic quill feed 0.04, 0.08, 0.15mm/rev
Automatic cut off depth stop on quill
Oil lubrication pump and reservoir
Slideway covers Y & Z-Axis
Mill head tilts to ±45º forward and back
Mill head tilts to ±90º left and right
Coolant system with flexible hose
Manual quick action quill lever
Mechanical spindle brake
Tool box and manual

Includes
3-Axis digital readout counter fitted with X & Y scales only
One-shot oil lubrication pump and reservoir
Drawbar M12 thread
Coolant system
Slideway covers
X-Axis power-feed
Halogen light
Safety cutter guard
Swarf tray


ORDER CODE: M593D
Model: BM-22AD
Digital Readout: 2-Axis Digital Readout
Type: Vertical
Table Size: 1066 x 230mm
Spindle Taper - Vertical: NT30
Longitudinal Travel (X-Axis): 590mm
Cross Travel (Y-Axis): 295mm
Vertical Travel (Z-Axis): 380mm
Type of Slides: Dovetail
Ram Travel: 500mm
Quill Travel / Diameter: 127mm / 85mm
Throat Depth (max.): 720mm
Tilting Head (Left ~ Right): ±90º
Tilting Head (Forward ~ Back): ±45º
Power Feed - Quill: 0.04, 0.08, 0.15mm/rev
Power Feed - Longitudinal (X-Axis): 20 - 2000 mm/min
Power Feed - Cross (Y-Axis): Optional
Power Feed - Vertical (Z-Axis): Optional
Table T-Slot Size: 16mm
Work Table Load Capacity: 250kg
Spindle Speeds Vertical (steps/rpm): 8 (80-2760rpm)
Motor Power - Vertical: 2.2kW / 3hp
Motor Voltage: 240V - 15amp
Overall Height: 2150mm
Weight (nett): 1100kg


For more information on this machine, please visit:

Hare and Forbes Machineryhouse
Sydney: (02) 9890 9111
Melbourne: (03) 9212 4422
Brisbane: (07) 3715 2200
Perth: (08) 9373 9999
http://www.machineryhouse.com.au/M593D

Machineryhouse - NZ
Auckland: (09) 2717 234
http://www.machineryhouse.co.nz/M593D