Connecting A PowerFlex 525 To PlantPAX in FactoryTalk View Studio V10 Using Studio 5000 V32

FactoryTalk View Studio PlantPAX is somewhat different to set up the communications, the logic, & the hardware if you have never done it so I wanted to show a step by step process of how things work.

Leaving limited if any questions to be asked.

To talk about the environment of this video:
We used an L73 processor on Studio 5000 version 32 with the FactoryTalk View Studio at version 10 using the standard function block & ladder logic that PlantPAX uses.

Video Content Breakdown:
0:00 Overview of starting the PlantPAX PLC program
1:10 Syncing The PowerFlex 525 To The Studio 5000 I/O
3:40 PLC Tag Structure Talk - Function Block & Ladder Logic
4:10 Overview of the Function Block AOI For PlantPAX
7:20 Overview of the Ladder Logic structure
8:02 Explaining the PowerFlex 525 Input Output Tag Structure
10:04 Showing the connections | Important
12:50 Simple Layout of connections
14:20 Downloading Our Studio 5000 Program to the processor
15:05 Explaining the FactoryTalk View Studio Setup
16:55 The (RAS-BAS) P_VSD Graphics
17:50 Passing HMI Parameters in PlantPAX
19:30 Running The HMI Client To Test The PowerFlex 525
20:30 Reset the drive fault from the PlantPAX screen
20:50 Starting the PowerFlex 525
23:50 Talking about simulation testing in PlantPAX
27:30 Enabling forward & reverse in the PlantPAX module
28:00 Forward & reverse testing of the PowerFlex 525
29:15 Where to get the files to download for yourself to test

Join Here: https://mmini.me/Join-Here

I hope you enjoyed the video.

Thank you for watching the video.

Learn, Implement, Succeed

If you are interested in getting serious about your knowledge & learning how to better your career then check out our training center.

Don't forget https://mmini.me/Join-Here

#PlantPAX #PowerFlex525