Siteworks Infield Design UTS Exported to Earthworks

In this video, we will demonstrate how to export an infield design from Trimble Siteworks to Trimble Earthworks using a Universal Total Station (UTS). This is a common workflow used in construction to transfer design data from the office to the field.

To export an infield design from Siteworks to Earthworks, you will need the following:

Trimble Siteworks software
A data collector
A Universal Total Station (UTS)
A USB cable to connect the data collector to the UTS

Once you have gathered your equipment, follow these steps to export an infield design from Siteworks to Earthworks:

1. Open Siteworks and load the infield design you want to export.
2. Connect the data collector to the UTS using the USB cable.
3. On the data collector, open the Earthworks software.
4. Select the "Import from Siteworks" option.
5. Select the infield design file you want to export and click the "Import" button.
6. Once the import is complete, the infield design will be loaded into Earthworks.

You can then use Earthworks to stake out the infield design or to control machine guidance systems.

Here are some additional tips for exporting an infield design from Siteworks to Earthworks:

Make sure that the Siteworks and Earthworks versions on your data collector are compatible.
Use a high-quality USB cable to connect the data collector to the UTS.
Make sure that the UTS is properly calibrated.
If you are exporting a large infield design, it may be helpful to break it up into smaller files.

If you have any questions about exporting an infield design from Siteworks to Earthworks, please visit our site at https://sitech-im.com

Trimble Siteworks, Trimble Earthworks, Universal Total Station, UTS, infield design, export, construction, stake out, machine guidance