How to replace the front brake pads Citroën C4 mk2 🚗

BUY THE AUTO PARTS you need for the operation : 👉 http://bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 http://bit.ly/MCD12AppStore, 🤖 : http://bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠

Needed parts:
Brake cleaner : http://bit.ly/brakecleaneren

Brake pads : https://bit.ly/padsBOLG041165en

Copper grease : http://bit.ly/coppergreaseen

Threadlocker

💪 TIGHTENING TORQUES FOR FRONT BRAKE PADS CITROËN C4 mk2
Slide pins bolts : 27 Nm
Stud bolt : 100 Nm

Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Front brake pads on a Citroën C4 mk2 .

Discover the world of UseTool EN on http://bit.ly/2mtjtft

Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool EN to repair your C4 mk2 : https://maclede12.co/toolboxCLASOS3050en 🏆🤖💣

Iron wire
Socket wrench
Flat head screwdriver
Wheel lug wrench
Long flat head screwdriver
Thin flat head screwdriver
Torx T45 bit
Piece of tissue
Multi-bit cartridge case
Hammer
Wire brush
Brake caliper windback tool
Torque wrench: https://maclede12.co/torquewrenchCLAS..., https://maclede12.co/torquewrenchCLAS..., https://maclede12.co/torquewrenchCLAS...

🔝💪Safely lift your C4 mk2 with the hydraulic jack: https://maclede12.co/jackCLASOH5304en and axle stands: https://maclede12.co/standsCLASOM3002... recommended by UseTool EN 💪🔝

Hydraulic jack
Axle stand

🚗📢💡 RESOURCES 💡📢🚗

Usetool's warnings
Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other.

Drive smoothly and avoid sudden braking for the first 50 kilometres or so to avoid glazing the new pads.

Make sure to check the stability of your vehicle before starting the operation.

Don't burn yourself on the pads if you've just gone for a drive as braking creates friction and long-lasting heat.

Usetool's info
What do we mean by "glazing new brake pads"?

Break pads are made of a material that needs to be run-in when new. If this procedure is not done properly, when braking too hard, the material overheats and hardens. Consequently, the brakes become less effective.

📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
[ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely :    • How to lift your Citroën C4 mk2 safely ⬆️  

[ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel :    • ASTUCE : Pneu crevé ? Déposer et reposer u...  

[ USETOOL'S TIPS & TRICKS ] How to (PROPERLY) use a torque wrench? 🔧 :    • How to (PROPERLY) use a torque wrench? 🔧  

How to replace front brakes, rotors and pads (Complete guide) 🚘 :    • How to replace front brakes, rotors and pa...  
Space Race by tubebackr |   / tubebackr  
Music promoted by https://www.free-stock-music.com

Terms and conditions of the offer : https://www.mister-auto.co.uk/operati...

Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.

0:00 Intro
0:12 Remove the pads
2:45 Replace the pads
4:38 Tips