How to Change Mercedes Vito W639 Engine Oil and Filter | Best Practices & Tips

🔧Mercedes Vito W639 116 Engine Oil and Filter | Best Practices & Tips🔧
Welcome to my channel! In this video, I will show you how to change the Vito engine oil and filter using best practices. I did the same for my old Vito W639 115, and that engine never had problems for 600,000 km.

0:00 – Intro
0:25 – Tools & parts overview
1:03 – Draining old engine oil
1:44 – Removing old oil filter
2:45 – Installing new oil filter
3:44 – Completing oil drain
4:00 – Filling new oil & checking level
4:48 – Service reset procedure





📋 Video Highlights:
Introduction and overview of the process.
Tools and parts needed for the oil and filter change.
Preparing your Vito, including lifting the car and preheating the engine.
Draining the engine oil with safety tips.
Removing the oil filter and necessary components.
Cleaning the filter housing and replacing oil seal rings.
Replacing the copper seal washer on the oil drain screw.
Reassembling all parts and components.
Properly filling the engine with oil and checking the level.
Resetting the oil service indicator.
Final tips for maintaining oil levels and service intervals.

🛠️ Tools and Parts Needed:
Bosch oil filters
Copper seal washer for the oil sump screw
Quality engine oil (MB229.51 or MB229.52)
Paper towel roll
Flathead screwdriver
13mm spanner
74mm oil filter removal tool
Socket drive for the oil filter tool
Pick or small flathead screwdriver for removing oil O-rings
Oil drain pan
Good car jack

Whether you're a DIY enthusiast or just looking to save some money on repairs, this video will provide you with all the information you need to successfully change your Vito engine oil and filter.
If you have any questions or need further assistance, feel free to leave a comment down below. Don't forget to like, subscribe, and hit the notification bell to stay updated with more helpful tutorials!

📋 Disclaimer:

The content provided in this video is intended for informational and educational purposes only. The procedures demonstrated are based on personal experience with the Mercedes Vito W639 116. While every effort has been made to ensure the accuracy and safety of the information provided, the following points should be noted:

Safety First: Always prioritize safety when working on your vehicle. Ensure the engine is turned off, the keys are removed from the ignition, and the vehicle is on a stable, flat surface before starting any work. Wear appropriate safety gear, including gloves and eye protection.

Tool Usage: The tools suggested, such as the 13mm spanner and 74mm oil filter removal tool, are based on the specific needs of this task. Ensure you are familiar with the correct usage of these tools to avoid personal injury or damage to the vehicle.

Technical Variations: Vehicle models and configurations can vary. The instructions provided are specific to the Mercedes Vito W639 116, year 2012. If you are working on a different model or year, consult the vehicle’s service manual for specific guidance.

Oil Handling: Be cautious when handling engine oil. Preheating the engine can help with oil drainage, but do not let it get too hot to avoid burns. Use proper disposal methods for old oil and filters in accordance with local regulations.

Professional Assistance: If you are unsure about any step of the process or encounter issues beyond your expertise, seek assistance from a certified automotive technician. Attempting repairs without adequate knowledge can result in injury or further damage to your vehicle.

Personal Liability: The creator of this video and accompanying content assumes no responsibility for any damage, injury, or loss that may occur as a result of following the instructions provided. Viewers are encouraged to use their own discretion and consult professional resources when necessary.

By proceeding with the instructions in this video, you acknowledge and accept these terms. Thank you for watching, and always exercise caution and due diligence when performing vehicle maintenance.