Colour Fastness to Water test ISO 105-E01

I explain about this test :---
1. Specimen size(40 ± 2) mm × (100 ± 2) and Multifiber size (40 ± 2) mm × (100 ± 2)
2. Stitch the specimen with multifiber on face side
3. Specimen Immerse in water for 30 min.
4. Take water 50:1 times (in original weight of the specimen )
5. Mount the specimen perspiration tester and weight apply (12,5 ± 0,9) kPa With acrylic plate (No. of Acrylic plate11)
6. Heat the loaded specimen in oven at (37 ± 2) °C. for 4 h.
7. Remove the specimen in perspiration tester and drying separate specimen and multifiber for over night after that assessment.



Note :--- I am explaining this test
I have explained as much as I know if there is any error please comment.
you have any question regarding this test plz comment.

BELOW LINK PROVIDED FOR TEST

Please Subscribe and Share my channel
My Email: -- [email protected]


ASTM D3512 RTP PILLING TEST
   • PILLING TEST ASTM D3512  

FABRIC WEIGHT ASTM D3776 Option -C (GSM)
   • FABRIC WEIGHT ASTM D3776 Option -C (GSM)  

Tensile Strength ASTM D5034
   • Tensile Strength ASTM D5034